Ares I crew launch vehicle first-stage: NASA’s prime contractor ATK speaks

by | Mar 31, 2008 | Constellation | 1 comment

The following text is my expanded notes from my 28 February 2008 interview with Alliant Techsystems’ (ATK) space launch systems’ vice president Mike Kahn at the company’s clearfield offices in Utah.

The [Ares I crew launch vehicle] resonant burning, oscillation is due to the variation of the width of the thrust channel. The exhaust gas flow through that varying pitch generates perturbation. Garry Lyles [NASA Marshall Space Flight Center’s engineering associate director] will issue a report [on oscillation] at the end of March. [Question is] will the shaking attenuate with the upper stage, what is the upper stage’s natural frequency? The first-stage natural frequency changes as the burning goes on. The [first-stage’s] frustrum could be a dampner.

Caption: A CGI movie of what could be the Ares I-X test scheduled for April 2009
Note: this is not an ATK movie I found it on Youtube and thought it applicableGimbaling on Ares I slightly less than Shuttle, gimbles couple of degrees, thrust vector control (TVC) is the same [system]. [The TVC is] designed for more than that, higher thrust [from the nozzle] means smaller degree of change for [change of velocity].

The current system uses hydrazine for TVC actuators’ hydraulics. Our goal is…can we replace hydrazine with something else. Helium is one option. [We] want to change what powers TVC hydraulics. The question they are asking is, what is the right one and when do we introduce it [and] what is lower cost? [The] safer replacement will reduce life cycle costs because we can remove the controls and precautions that are costs.

There is a system tray to connect the TVC to the first-stage avionics in the upper stage.

[For] composite [casings the] trade [is] on processing and building [it], [we would] use metal connectors for each [composite] casing, segment. The more performance composite would set you up for a larger internal pressure [for more thrust].

[With five segments] more surface area means more propellant burning and more pressure. [It is] not just [the number of] fins but how deep they are.

The extra segment does mean higher separation and as the [Pratt & Whitney Rocketdyne] J-2X is not as capable as the Space Shuttle Main Engine, [it] resolved that less thrust [from the J-2X].

We did consider introducing nozzle extension for resolving increased weight of new Ogive [Sears-Haack] shape to the [Orion crew exploration vehicle] boost protection cover.

We are still burning for 120s, we will just get to 70nm faster. Extra segment just means more propellant so more thrust. [We reach] max-q at about 60s [into the ascent].

The composite frustrum helped us to meet the mass margin. We were within target weight by a few thousand pounds. Our [target weight] became easy because the higher thrust [from five segments] offset mass targets.

Ares I allows natural flow from Shuttle to Ares V. It is important to have Ares V discussions now. Doing Ares V at the right time is important for everyone.

About Seradata

Seradata produce the renowned SpaceTrak Launch & Satellite Database. Trusted by 100 of the world’s leading Space organisations, SpaceTrak is a fully queryable database used for market analysis, failure/risk assessment, spectrum analysis and space situational awareness (SSA).

For more information go to www.seradata.com/spacetrak

Related Articles

Lockheed, ATK announce Falcon 1 competitor

Lockheed Martin and Alliant Techsystems have announced this partnership for providing from 2012 a new 'C' version of the Athena Read more

NASA gives Ares I first stage test motor update

NASA has detailed preparations for the test firing of the first demonstrator motor for its Ares I crew launch vehicle Read more

ATK delays Ares first stage rocket motor test by up to 6 months

NASA's first Ares I crew launch vehicle (CLV) five-segment solid rocket motor (SRM) firing test has been delayed by up Read more

NASA 3rd Space Exploration Conference blog

Hyperbola is a technology orientated spaceflight blog written by Flight technical editor Rob Coppinger

Oiling the reaction wheels of space commerce?

Hyperbola is a technology orientated spaceflight blog written by Flight's technical reporter Rob Coppinger

Most “dangerous” EVA ever over, Discovery crew looks forward to shore leave

Hyperbola is a technology orientated spaceflight blog by Flight's technical reporter Rob Coppinger

NASA gets serious about the Moon as it awards refueling and other demo contracts

NASA has formally awarded “Tipping Point” contracts worth a total of US$370 million to 14 firms to demonstrate new technologies Read more

NASA OSIRIS-REx mission lands on asteroid Bennu, samples it (with door trouble) and leaves

NASA's OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, Security - Regolith EXplorer) space probe successfully descended, matched the asteroid Bennu’s rotational Read more

Cookies & Privacy

Click here to read about use of cookies on the website

Categories

Archives